Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM
In stock
The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.
Results:
- The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler.
- Reduction of felt recoil.
- Patented adjustment detent is located outside of the block and therefore no contamination.
- The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw /no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
- When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.
Specifications:
- Gas Block Material: 416 SS
- Finish: Melonite, QPQ
- Barrel Diameter: 0.750″
- Weight: 1.68 oz.
- Length: 1.00″
- Attachment Type: Solid
- Gas Adjustment: (Patented) 30 Locked Positions, Front Of Block
- Bleed Off Port: (Patented) Front Of Block
Included:
- Gas Block – Assembled
- (2) 10-32 x 3/16″ Set Screws/li>
- (1) Gas Tube Roll Pins
- (1) 3/32 X 6″ L-Shaped Hex Keys
- Installation Instructions & QR code for video tutorial
| Weight | 0.768 oz |
|---|---|
| Dimensions | 1 in |
| Finish | Nitride / Melonite |
| Gas Block Journal | 0.75 |
| Adjustable | Yes |
| MPN | SABO-DI-750SM |
| UPC | 850011846063 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.
Customer Reviews
- Reviews
- Questions
- gas block
- barrel
- quality
- shipping
- others
- builds
US
Love these
I have purchase several of these over the last few years and have had really good luck
USPerfect!
After buying a suppressor for my 243 I immediately had feeding issues. After exhaustive efforts of trying this and that I was then left with the possibility of it being the gas block. So I bought this and after installing and adjusting it per the instructions I finally solved the problem! If you are using a suppressor and are having feeding issues, first get an adjustable gas block!
US.750 Adjustable Gas Block-Superlative Arms
This is a well made, great product. Easy to install and easy to adjust!
USPerfect
Exactly what I needed. High quality part.
USGood product
Easy to DIY. Punch the retainer out of the original gas block, remove it and the gas tube. Replace gas tube into the new SLA, make sure to angle the gas hole facing down. Punch the gas tube back into SLA and insert into Carbine. Be gentle with it on the install, use lube to insert tube if needed, but it should be a perfect fit if you measure proper size. No apologies if the undertones are adult-themed. Once gas block is installed, screw the nut as much as needed to vent the proper amount of cycling gas.
