A quality upper assembly without cutting corners. This means starting with a top tier mil-spec forged upper receiver, using a nitrided steel gas block as opposed to phosphate or aluminum, quality American Made M-LOK handguards and one of the nicest nitrided A2s you’ll find anywhere. This also means taking the time to ensure that the upper will function reliably. We use Permatex 242 on key components while using mil-spec AEROSHELL 33MS Anti-Seize grease on the properly torqued barrel nut and muzzle device.

Bottom line is this: you hear all the time about guys buying a budget upper and it not lasting or having to send it back because of some hardware defect or other issue caused by a careless assembly process. That is why we use top tier components and assemble each unit to the highest standard of quality. We want your upper to function flawlessly out of the box. In fact, we guarantee it will.

Buy with confidence, this upper is backed by our 30 day satisfaction guarantee. Buy it, run it, abuse it, and if you aren’t satisfied you can send it back for a full refund.

Handguard style may vary from batch to batch

Lifetime Warranty

Guaranteed Sub-MOA performance with match grade ammo and proper shooting technique

Made in the USA

Vortex Venom 1-6-24 SFP 30mm AR-BDC3 LPVO w/ 2″ Cantilever 30mm Mount

Venom 1-6×24 Second Focal Plane Riflescope – BDC-3 (MOA) Reticle (VEN-1601)
When you’re ready to maximize your capabilities, the Venom 1-6×24 SFP delivers the downrange accuracy, workhorse function, and speed you need for opening the throttle on close- to mid-range engagements. Water, fog, and shockproof. Great glass quality. The illuminated BDC3 reticle makes for quick target acquisition. Standard throw-lever delivers on-the-fly magnification. For entry-level users, it’s a hardworking LPVO built to get you in the game.

BDC-3 (MOA) Reticle
Improved for ranging distances and holdovers and illuminated for clarity in low light.
Use the ranging feature at the top of the reticle to range a silhouette target up to 600 yd.
BDC subtensions accurately shoot targets from 20-650 yards.
5 MPH wind increments

Elevation & Windage Turrets
The Venom1-6×24 SFP riflescope comes equipped with capped Elevation and Windage Turrets. This protects the turrets from accidental adjustment while out in the field, in transit, or in storage. You will need to remove the caps prior to making any adjustments on the turrets.

Use turrets to adjust the point of impact. The Venom 1-6×24 SFP riflescope uses a 1/4 MOA adjustment on both the Windage and Elevation Turrets. Each click will move the point of impact roughly 0.25″ at 100 yards for MOA. The turret on the top of the riflescope is the Elevation Turret, which is used to adjust the point of impact up and down. The turret on the righthand side of the riflescope is the Windage Turret and is used to adjust the point of impact left and right.