Sons of Liberty Gun Works 16" 5.56 M4-EXO2 M-LOK Rifle - Black CA compliment with compmag

Sons of Liberty Gun Works (SOLGW) – M4-EXO2 Rifle – MLOK Compatible – 223REM/556NATO

Features:

• Mid-length Gas
• Liberty Fighting Trigger
• Angry Patriot Lower
• Sprinco Blue Rifle Length Spring
• Three OKAY Industries SOLGW mags (30 Round Capacity)
• Ships in Tactical Soft Case

Specifications:

• Barrel: Sons of Liberty Gun Works 16” 4150CoMOV 1:7 MPI HPT Barrel
• Caliber: 5.56 NATO Chamber
• Barrel Steel: 4150 CrMoV (Chrome Moly Vanadium per MIL-B-11595E)
• Twist Rate: 1/7 Twist Six Groove
• Thread Pitch: 1/2-28 Threaded Muzzle
• Gas Block: .750 Gas Block Journal with appropriately sized gas port
• Weight: 25 Ounces
• Barrel Finish: QPQ Corrosion Resistant Finish
• Barrel Extension: QPQ coated M4 Feed Ramp Extension
• With “F” Marked Taper Pinned Front Sight Block
• Sons of Liberty Gun Works Bolt Carrier Group HPT/MPI
• High Pressure (proof) Tested (HPT)
• Magnetic Particle Inspected (MPI)
• Lower Receiver: Sons of Liberty Gun Works Angry Patriot Forged Lower Receiver
• Material: Made from Mil-Spec 7075-T6 aluminum forgings
• Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodized Coating, Flat Black Dye, Non-Reflective, NiAc Seal
• Contour is fully machined leaving no flash marks from the forging.
• All lowers are cut with M16 auto pocket.
• Safe, Fire, and Full Auto Pictograms
• Buffer System: Mil -Spec Buffer System
• Receiver Extension: 6 Position Mil-Spec Receiver Extension Tube made from 7075-T6 Aluminum
• Buffer: 3.1 oz. H Buffer
• Buffer Spring: Sprinco Blue Rifle Length Spring
• Receiver end plate: QD Mil-Spec with properly staked Castle Nut
• Fire Control Group: Liberty Fighting Trigger
• Trigger Guard: B5 Systems Polymer
• The SOLGW Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP. (not to be confused with MIM parts in the commercial market)
• Our Safety and Takedown Pivot Detents are solid hardened Stainless Steel from KNS Precision Machine.
• SOLGW Magazine catch and Takedown Pivot Pins are machine from Mil-Spec AISI8620 per the USGI TDP, heat treated and coated per mil spec.
• Our Mag Buttons are made from steel per Mil-Spec versus the aluminum found in the majority of commercially available LPKs on the market.
• Grip: B5 Systems (Black)
• Stock: B5 Systems Bravo (Black)
• Upper Receiver:
• Material: Made from Mil-Spec 7075-T6 aluminum forgings.
• Exterior Finish: Anodized to Mil-Spec MIL-A-8625F, Type III, Class 2, Hard Anodic Coating, Flat Black Dye, Non-Reflective, NiAc Seal
• Interior Finish: Dry Film Lube
• T-Marks: Engraved T-Marks
• Charging Handle: SOLGW/Radian Raptor-LT
• Gas Block: Sons of Liberty Lo-Pro Gas block made from 4140 Steel and Nitride Treated
• Gas Tube: Sons of Liberty Standard Mid Length Melonited Stainless Steel
• Hand Guard: Sons of Liberty EXO2 MLOK Rail
• Muzzle Device: Standard A2 Flash Hider
• Sights: NONE