We’re proud to unveil the ARC-Fire, the latest innovation from AS Designs – a cutting-edge ambidextrous selector trigger system featuring our patent-pending Active Reset Clutch (ARC) technology. Designed to dramatically increase your firearm’s rate of fire without compromising control or compliance, the ARC-Fire forces the trigger to reset immediately after each shot, enabling rapid, precise follow-up shots – with one round per action of the trigger, every time.

Multi-Platform Compatibility: Engineered to support over 10 of the most widely used firearm platforms, with more on the horizon. (AR15, JAKL, MP5, MCX, MPX, SCAR, BRN-180, G3, AP53, UMP, STRIBOG, DISSENT, and more to be added soon)

Ambidextrous Selector: Fully ambi design provides fast, intuitive access for both right- and left-handed shooters.

Three-Position Control: Selector positions include Safe, Semi, and ARC, putting enhanced speed and performance at your fingertips.

The ARC-Fire is built for shooters who demand performance and dependability. Our patent-pending design maximizes durability and reliability under sustained use. The selector switch is engineered for positive tactile feedback and effortless transitions – even under stress.

Whether you’re running drills, competing, or simply pushing your platform to its limits, the ARC-Fire delivers an unmatched blend of speed, precision, and durability – giving you the edge every time you pull the trigger.

AS Designs ARC-Fire – Reset Redefined.

Includes:

• M2 tool steel ARC V2 Cam
• M2 tool steel ARC V2 Lever
• M2 tool steel ARC V2 Detent Bar
• 4140 steel ARC V2 Primary Selector
• 4140 steel ARC V2 Ambi Selector
• Cam, Lever, and Detent Bar feature DLC coating. Selector Levers feature Black Oxide coating.
• Includes pre-cut trigger and KNS safety detent.

Trigger Compatibility:

• Most Mil-Spec Triggers w/ SS Cut
• Geissele Triggers w/ SS Cut*
  • SSA
  • SSA-E
  • SSA-E X Trigger
  • SSA-X
  • SD-E
  • SD3G
  • SDC
  • SSP
  • S3G
  • G2S
• ALG Triggers w/ SS Cut
  • Defense QMS
  • Defense ACT
• BCM PNT Trigger w/ SS Cut
• PSA Enhanced Polished Trigger (EPT) w/ SS Cut
• Aero Precision FCG w/ SS Cut
• CMMG FCG w/ SS Cut
• Anderson Stainless FCG (Cut Hammer Version) w/ SS Cut*

* – Indicates an additional “lever blocker” part is needed to prevent overtravel. We will offer these for an affordable cost in metal as well as provide the STL file if you would prefer to print it.

Known incompatible triggers: LaRue Tactical MBT-2S, CMC Single Stage Flat/Curved, Rise Armament RA-140

Platform Compatiblity:

• AR-15 Platform – .223/5.56, 300BO, 9mm, 10mm, .45, and .40
• CMMG Banshee
• MP5 Platform – Fits AR-based MP5 lowers, Leber V2 will require the version with safety selector area cutout, normal model support to come later. LEE SPORTING SUPPORT NOT GUARANTEED OR WARRANTIED.
• G3/91 Platform – Same as MP5.
• JAKL-15 – .223/5.56 and 300BO – Requires JAKL-15 Slip Trip Kit
• JAKL-9 – 9mm – Requires JAKL-9 Slip Trip Kit
• MPX – 9mm (excl. Copperhead) – Requires MPX/MCX Slip Trip Kit
• MCX – .223/5.56, 300BO, and 7.62×39 – Requires MPX/MCX Slip Trip Kit
• Kuna – 9mm – Requires AS Designs Kuna Lower Kit (Nexus compatibility unconfirmed)
• Stribog – 9mm, 10mm, and .45 – Requires AS Designs Stribog Lower Kit
• Dissent – .223/5.56, 300BO, 9mm, .45, and 5.7 – Requires Dissent Slip Trip Kit
• Dissent – .308 and 8.6BLK – Requires Dissent Slip Trip Kit and Custom ARC Lever
• HK MR556/416 (All versions) – Milspec AR FCG or precut Geissele needed, doesn’t require a different bolt carrier.
• HK MR762/417 (All versions) – Precut MR762 Geissele needed and upcoming 308 ARC Lever suggested, doesn’t require a different bolt carrier.

Upcoming Platform Compatiblity (finalizing):

• JAKL-10 – .308 – Requires JAKL-10 Slip Trip Kit and Custom ARC Lever
• BRN-180 – .223/5.56 and 300BO – Requires BRN-180 Slip Trip Kit and Custom ARC Lever
• UMP – .45 – Requires AS Designs UMP Lower Kit
• GHM9 – 9mm – Requires AS Designs GHM9 Lower Kit
• APC9 – 9mm – TBD
• APC45 – .45 – TBD
• MCX – .277 and .308 – Requires MCX Heavy Slip Trip Kit and 308 ARC Lever
• SCAR – TBD
• GEN-12 – TBD

We do not ship to the following states: CA, CO, CT, DE, FL, HI, IL, MA, MD, MN, NJ, NV, NY, OR, and RI.

Note: All products are recommended to be installed by a qualified gunsmith.

Vortex Venom 1-6×24 SFP 30mm Rifle Scope – AR-BDC3 Reticle

The all-new Vortex® Venom® 1-6×24 SFP AR-BDC3 MOA LPVO is an entry-level LPVO scope engineered to deliver ultrareliable performance in any shooting application. This rifle scope features a shockproof and crush-resistant aircraft aluminum tube with a corrosion-resistant anodized finish that offers superior strength and reliability for reliable field service. The fast-focus eyepiece includes an easy-to-use throw lever for rapid magnification changes. An illuminated second focal plane AR BDC3 reticle delivers fast target acquisition and precision accuracy on close to mid-range targets, while finger-adjustable elevation and windage turrets deliver ultra-precise adjustments for enhanced accuracy. The fully multi-coated glass lenses offer improved edge-to-edge clarity and are protected from oil, scratches, and dirt with ArmorTek® coating. Further, the scope tube is gas-purged to protect against moisture buildup for reliable waterproof and fogproof field service in virtually any environment. Better yet, this scope is covered by Vortex’s VIP lifetime warranty so you can enjoy years of reliable field performance. Includes flip caps, lens cloth, one CR2032 battery, a custom 2mm tool, and a removable sun shade.

• Aircraft aluminum construction
• Anodized finish
• Illuminated SFP AR BDC3 reticle
• Fast-focus eyepiece
• Optional throw lever
• Finger-adjustable turrets
• Multi-coated glass lenses
• ArmorTek protective coatings
• Nitrogen gas purged
• Waterproof and fogproof
• Lifetime warranty
• Includes sunshade, battery, flip caps, and lens cloth