ODIN Works 5.56 Atlas Compensator - MB- ATLAS-5

One of the hardest parts about installing a compensator on your AR can be timing and tuning the comp. It can involve washers, shims, crush washers, various adhesives, pins, welding, and the list goes on. What if I told you none of that was needed to install a top of the line compensator Well, its true. The ODIN Works Atlas Compensator line does NOT need any timing to be done to the core portion that is threaded on. Only the sleeve and the cap need to be timed, no shims, no crush washer, no fussing. Plus, the sleeve is Titanium, adding incredible strength without excess weight. And of course the core and the cap are made of that amazing 416R stainless steel for toughness and longevity. They both feature a Black Nitride finish for protection and their look works quite well with the Titanium sleeve, giving the set an overall 2-Tone finish.

At the time this was written, there were over 100 5-STAR ratings from across the web. Plus, when you buy from AR15 Discounts, you get the AR15Discounts.com satisfaction guarantee. It means that if you’re not happy for any reason, you can send it back within 30 days for a full refund. When it comes to compensators, ODIN Works has set a completely new standard. Get yours today!

NOTE: 416R is a Crucible brand steel and it was formulated specifically for barrels. Most types of steel, including normal 416SS are not designed to be used in freezing temperatures. But this steel was designed to operate in arctic temperatures, up to -40F. 416R also has greater accuracy potential than normal 416SS and 4150 steel due to its ability to take highly defined rifling and machining cuts.

NOTE: Be SURE to check your AR Barrel threads when you are installing a new comp. It is very easy to cross thread and/or install the wrong compensator, so always double check and be very sure of what you are installing. Also, be very sure that you DO NOT install a 1/2×28 TPI Atlas 556 Compensator onto a 1/2×28 TPI Atlas 9mm Compensator. Shooting a 9mm bullet through a 5.56 hole is not going to end well.  

Technical Specs:

•     Titanium sleeve
•     Isonited 416R Stainless Steel

-ATLAS 5

•     For 5.56 /. 223 (22 cal) 1/2-28 threading
•     Length: 2.56″
•     Weight: 4.1 oz
•     Diameter: 1″