ODIN Works 10.5" 223 Wylde Carbine Length Light Profile Stainless Steel Barrel w/ FREE tunable GB - B-223-10-UL-C-TG
Only 1 left in stock
There have been many good options for a light weight barrel recently. Granted, when building a light AR, you’re looking for one that doesn’t weigh much, but you also want a barrel that is extremely strong and made to tight tolerances. Well, you can finally stop looking for your ideal barrel, cause its right here. At the time of writing we found 8 online reviews, all of which have a 5-STAR rating, that tells you this barrel is a great choice for your build. And with the AR-15Discounts.com satisfaction guarantee, you don’t have to worry. Our AR-15Discounts guarantee means that if you’re not happy for any reason, you can send it back within 30 days for a full refund. You can’t ask for much more than that!
The ODIN Works 10.5 416R Stainless Steel ULTRAlite Barrel comes standard with a .223 Wylde chamber so .223 and 5.56 NATO ammo are both gonna run, a carbine length gas system, M4 feed ramps for reliable feeding, a Button-Rifled 1:8 twist rate (meaning the bullet makes one full rotation every 8 inches while inside the barrel), 1/2×28 TPI thread pattern to fit all standard AR muzzle devices, and one of the lightest cuts possible on a barrel. This all comes together to provide you with a great 15.5 oz hand-lapped barrel! Let me say that again, This barrel only weighs 15.5 Ounces… just under a pound! As if all that wasn’t enough, this awesome little 10.5 ODIN Works barrel comes with a tunable Stainless Steel Gas Block. A tunable Gas Block allows you the capability to tune your AR for various types of shooting. You can shoot suppressed or un-suppressed, you can tune your AR to operate as an SBR, you can tune it to shoot rounds with less powder or vice versa, you also have the option of trying out any special reloaded ammo you did yourself, among other options.
NOTE: The .223 Wylde is a mix of the 5.56×45 NATO external chamber measurements and lead angle, but also utilizes the tighter .224 free bore diameter of the .223 Remington cartridge for better accuracy potential. As we all know, you could not fire 556 NATO ammo in a .223 Rem chamber due to the pressure differential and slight chamber size differences. The .223 Wylde solves this issue and gives the shooter the best of both worlds.
NOTE: 416R is a Crucible brand steel and it was formulated specifically for barrels. Most types of steel, including normal 416SS are not designed to be used in freezing temperatures. But this steel was designed to operate in arctic temperatures, up to -40F. 416R also has greater accuracy potential than normal 416SS and 4150 steel due to its ability to take highly defined rifling and machining cuts. 416R Stainless steel has a 12-14% Chromium content. Generally any steel with 13% or better Chromium is considered Stainless, so 416R could be considered non-stainless depending upon batch. Corrosion is possible with almost any steel, stainless or otherwise, just be sure to take good care of your barrel.
Technical Specs:
- Overall Length: 10.5
- Profile: Light Weight
- Gas Port: Carbine Length System
- Rifling: Button Type Cut, 1:8 twist rate (1 revolution per 8 inches)
- Weight: 15.5 ounces (Under 1 pound)
- Hand-Lapped 416R Stainless Steel
- M4 Feed ramps
- 1/2-28 Threaded Muzzle
Weight | 15.504 oz |
---|---|
Dimensions | 12.5 × 3 × 3 in |
Finish | Stainless |
Barrel Profile | Lightweight |
Gas System Length | Carbine |
Gas Block Journal | 0.75 |
Barrel Length (inches) | 10.5 |
Barrel Chamber | .223 Wylde |
Platform | AR-15 |
Twist Rate | 1-8 |
Muzzle Thread Pattern | 1/2×28 |
MPN | B-223-10-UL-C-TG |
UPC | 857392006482 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.
Customer Reviews
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
To the user who comment this
The Odin works barrel was not the issue, BCM, Nemo,Radian along with a lot of other manufacturers, require you to heat your receiver to expand the aluminum to get a perfect tight fit between barrel and receiver. This gives greater accuracy. By removing material you have ruined the tolerances and therefore, have in turn reduced accuracy. Hope this helps anyone who might read the review and think that the barrel is an issue.
Please select an FFL from the table below, if you do not see your desired FFL, click "Set Later" and you will be able to enter your FFL's information after checkout.
Name | City | State | ZIP | Phone | |
---|---|---|---|---|---|
Loading FFL contacts, please wait...
|