Kaw Valley Precision Stainless Steel Heavy Buffer - 10oz - KVP-10
Only 5 left in stock
Pistol caliber carbines such as 9mm, .40 S&W, .45 ACP, and 10mm are a blast to shoot but can be tough on AR-15’s internal components….Add a suppressor, and the increased back pressure can cause tremendous damage, without properly tuning your blowback system. The KVP 10 oz tungsten blowback buffer helps tame the destructive forces in suppressed and standard blowback AR15’s. Do yourself a favor and fine tune your setup for the softest shooting PCC possible!
Due to tungsten weight variation, actual weight of the buffer is between 10.3 and 10.5 ounces.
Features:
- Use in 9MM, 10MM, .40 S&W, or .45 ACP blowback AR systems
- Increases AR-15’s dwell time in blowback setups
- Quiets action (better for suppression)
- 10.3-10.5 oz actual weight (tungsten weights can vary slightly)
- 4 1/8″ OAL (Buffer spacer is NOT required)
- Stainless Steel Body
- Increases Reciprocating mass and weapon reliability
- Reduces wear on critical internal parts
- Reduces felt recoil
- Designed only for Carbine Length Stock and pistol kits
| Weight | 9.6 oz |
|---|---|
| Dimensions | 4.125 × 0.85 × 0.85 in |
| MPN | KVP-10 |
| UPC | 752830307711 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.
Customer Reviews
- Reviews
- Questions
- buffer
- quality
- build
- pistol
- Works
- weight
- problem
- rounds
- parts
- prices
US
Great buffer!
I have had great success with these buffers; one in a AR45 and one in a AR9 (both with 5 inch bbls). These truly make a difference if you are running a "full semi auto" configuration with a can attached. I highly recommend them to anyone who is building a similar set up.
USWorks great with my ar9 build and frt
No issues yet but if I do have any I’ll make sure to let yall know
USWorked GREAT with a small issue
This is absolutely the best thing I've put in my ar9. I did take out one weight. This was combined with a carbine length flat wound spring. I gave it 500 rounds of all different manufacturers and it ate it all with no complaints. The only problem is that the flat spring is longer and a bit of a struggle to get it all in because the buffer doesn't have a flat spot. Additionally the lrho wouldn't come up and i had to remove about 1/8th" of the buffer rubber. As long as it keeps running the way it has I would not need to take it out, but it will be a fight coming out as well. All in all I recommend this 100%. Do your self a favor and get it. I don't regret it.
USPerfect
I needed a 10oz 4 inch buffer for my 45ACP blow back carbine. This one is perfect. They also had the best price I found. I used it with an Orange Sprinco buffer spring which was recommended by Sprinco. If you need a heavy buffer this one will fit the bill. I haven't tried it yet but I have no doubt it will be fine.
USar15 Discount
They have great customer service and the best prices around. I 100% recommend shopping with they.
