Daniel Defense M4A1 Flat Dark Earth/Black 5.56mm NATO 14.5" 1:7 Semi-Auto AR-15 Rifle - 02-088-06027-011
Save 7% MSRP: $2,325.00$2,163.00
Only 1 left in stock
The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005. The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.
Featured:
- Lower Receiver: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- Upper Receiver: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- Barrel: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5″ M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- Gas System: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
- Muzzle Device: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- Bolt Carrier Group: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- Buffer: H Buffer
- Handguard: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
- Receiver Extension: 6 Position Mil-Spec 7075-T6 Aluminum
- Buttstock: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- Pistol Grip: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Rail Panels: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
Specifications:
- Daniel Defense DDM4A1 5.56x45mm 14.5″ Rifle, FDE/Black – 02-088-06027-01
- Caliber: 5.56x45mm
- Muzzle Thread: 1/2×28″
- Gas System: Carbine
- Magazine: 30 Round Daniel Defense
- BCG: M16 Profile, Chrome Lined, MP Tested
- Buffer: H Buffer
- Sights: None
- Handguard: DD M4A1 Rail Interface System (RIS) II
- Buttstock: DD Buttstock, Polymer with Soft Touch Overmold
- Grip: DD Pistol Grip, Polymer with Soft Touch Overmold
- Mounting System: Quad Rail
- Lower Receiver Material: 7075-T6 Aluminum
- Lower Receiver Finish: Type 3 Hard Coat Anodized, Black
- Upper Receiver Material: 7075-T6 Aluminum
- Upper Receiver Finish: Type 3 Hard Coat Anodized, Flat Dark Earth
- Barrel Material: CMoV Steel, Cold Hammer Forged, Chrome Lined, HPT/MPI
- Barrel Finish: Heavy Phosphate Coated
- Muzzle Device: Pinned and Welded Daniel Defense Flash Suppressor
- Twist: 1:7
- Barrel Length: 14.5″
- Length: 31-1/2″ – 34-3/4″
- Weight: 6.74 lbs.
| Weight | 107.84 oz |
|---|---|
| Dimensions | 35 × 9 × 4 in |
| Action | Semi-Auto |
| Barrel Length | 14.5" |
| Cartridge Compatibility | 5.56 NATO |
| Finish | Black |
| Stock Material | Synthetic |
| Magazine Capacity | 30 |
| Condition | New |
| CA Compliant | No |
| MPN | 02-088-06027-011 |
| UPC | 815604015547 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.
